Getting Lighting Repaired Vs. Replaced

Getting Lighting Repaired Vs. Replaced

Here’s what you can do to decide if you need a lighting repair or replacement.

Outdoor lighting can be so captivating and alluring when you first get it installed. After a few years, however, it loses its luster. You may be asking yourself if your lighting needs a few simple repairs or if it needs to be replaced entirely. There’s no universal rule that dictates which choice is better, but there are some variables that can influence your decision. Here’s what you can do to decide if you need a lighting repair or replacement.

Fixtures

Take some time to observe your lighting fixtures. What material is used to create your fixtures? For fixtures that are made from high-quality components, such as copper or brass, they can likely be repaired.

But if your lighting fixtures are made from materials like plastic or aluminum, which are of lower quality, you’ll likely have to replace them. Lower quality materials have notoriously shorter life spans and don’t offer a socket the same level of protection as fixtures that are made from higher quality materials.

Connections

Poor connections are among the biggest issues people encounter with their lighting. If you notice that your lights are going out, bad connections could be the source of the problem. Ask yourself how your fixtures are connected to the wiring running towards your source of power. Sometimes, pierce connectors and wire nuts are put underground even when it’s ill-advised. Pierce point connectors that go to the main line will usually loosen and start corroding around the pierce point.

If you have a system that has any of these kinds of connections, it’s likely that they are corroded, which is the reason your lighting isn’t working as it should. This kind of problem can’t be repaired. You’ll need to have a professional lighting company come over and replace them with watertight connectors. These connectors can resist corrosion when they’re put underground.

Transformer

The transformer serves as the power center for your lighting system. If your lights don’t work, there’s a chance that there is a loose connection in your transformer. Electrical connections loosen as you turn your lights on and off over and over again. In this situation, it’s an easy problem to repair.

However, there are times when loose connections cause a phenomenon known as “arcing.” When this happens, electricity goes across loose connections and generates heat. The heat that’s generated can melt your connections or even cause fires. This is a signal that you need to replace your transformer.

Check Out Our Services From CMI Lighting

With over 35 years in the industry, CMI has an array of equipment to handle the logistics of any in-house job. We also frequently provide solutions to property managers and upcoming developments. CMI Companies provides services in Mid-Atlantic Region and proudly serves clients in Northern Virginia, Maryland, Richmond, Southern Virginia, Manassas, Prince William County, Fairfax County, Rockville, and Prince George’s County. Also, check us out on Facebook, Twitter, and LinkedIn.

The post Getting Lighting Repaired Vs. Replaced appeared first on CMI Companies.

Why You Should Avoid DIY Electrical Repairs

Why You Should Avoid DIY Electrical Repairs

Here are some of the reasons you should leave electrical work to the professionals.

There are many tasks around a business that people may want to get done on their own. This is often done to save time and money hiring a professional. With that said, working with electricity is not one of the tasks you should do yourself. While the idea of saving money is appealing, taking on electrical work on your own is risky and can get you hurt if you’re not careful. That’s why we always recommend you to get the help of a professional electrician for any electrical problems your business has. Here are some of the reasons you should leave electrical work to the professionals.

Electrical Shock

Getting shocked is, not shockingly, one of the main reasons to avoid taking jobs on yourself. Electricity is dangerous and can be deadly if not approached with caution. Many people who take these jobs on themselves are not properly trained. This can cause people to get injured. The last thing you want to do while making repairs is shock yourself. Professionals know what precautions to take to avoid injuries, so it’s best to go with someone who has experience on how to safely approach these problems.

Fire Hazards

Electrical fires are another risk for DIYers. Without proper training, your building can be put at great risk. With even one wire out of place, a building can easily start going up in flames. Also, unlike electrical shocks, fires can have devastating results on a building, resulting in damage that takes months to repair. It also takes a toll on your business from a financial perspective. That’s why it’s best to have an electrical contractor come over to handle any issues with your electrical system.

Inspection Problems

Electrical components in any building have to pass an inspection before you’re allowed to use them. For people who want to tackle jobs on their own, this part often gets ignored. The end result can be anything from heavy fines to electrical gear not functioning properly. Sometimes, people believe that they get away without professional-level repairs. However, the problems always end up catching up with them. Get professional help to be safe. Hiring a professional is best because they will guarantee that your building will pass inspection.

Check Out Our Services From CMI Lighting

With over 35 years in the industry, CMI has an array of equipment to handle the logistics of any in-house job. We also frequently provide solutions to property managers and upcoming developments. CMI Companies provides services in Mid-Atlantic Region and proudly serves clients in Northern Virginia, Maryland, Richmond, Southern Virginia, Manassas, Prince William County, Fairfax County, Rockville, and Prince George’s County. Also, check us out on Facebook, Twitter, and LinkedIn.

The post Why You Should Avoid DIY Electrical Repairs appeared first on CMI Companies.

Reducing Your Summer Electrical Bill

The coming of summer brings excitement for many people. All of the warm weather and sunshine allows us to spend more time outside and soak up some Vitamin D, but the heat of summer can also mean that money is spent on unnecessary electrical bills for many people. With summer and warm weather just around the corner, it can be extremely useful to be aware of some tips for reducing your summer electrical bill, so the licensed electricians at Expert Electric are here to help.

How to Reduce Your Summer Electrical Bill

Although many people end up saving on electricity during the summer by not using heat as much and spending less time using electrical entertainment, there are many ways to further save on electricity. Some great tips that might help to keep your electrical bills down include:

Turn Off the Lights

Remembering to turn off the lights is one of the most important factors in reducing your electricity bill in the summer. It is best to make use of the natural light throughout the day by opening the blinds and letting natural sunlight into your home or building.

Manage Your Air Conditioner Properly

While having an air conditioner can be a great way to keep your home cool this summer, running your air conditioner all the time can result in a hefty electrical bill. Some ways that you can cut down on the cost of running an air conditioner include:

  • Clean out the filters and check to ensure that the systems are operating at peak performance.
  • Automate your thermostat so that your air conditioner is programmed to run at certain times during the day.
  • Keep electric devices (lamps, TVs, computers, etc.) away from the thermostat.
  • Try to place air conditioners in the shade, as this can help reduce operating costs by up to 10%.
  • If your air conditioner is not working like it used to, do not be afraid to replace it by contacting a licensed electrician.

Improve Air Circulation

It is great to use an air conditioner to create a cooler environment, but air conditioning cannot go far without proper circulation. Proper air circulation created by ceiling fans, box fans, and other types of air movers can help make your home feel a lot cooler than it actually is. Ceiling fans and box fans also use less electricity than an air conditioner. To create proper airflow, you should consider using portable fans or ceiling fans in conjunction with your air conditioner. Another great way to create a breeze in your home at night is to open opposing windows (when the temperature outside is at least 3 degrees cooler than inside).

It is also always important to remember that heat rises. A great way to lower the temperature in upstairs rooms, especially the attic, is to install ceiling fans in problematic spaces. Setting your fan to turn counterclockwise in the summer at a higher speed can create a wind-chill breeze effect that will lower the temperature on the upper floors of your home, as well as create a nice breeze downstairs that will leave you feeling cooler.

Automate Your Thermostat

Make sure that you turn down your thermostat when you are not at home. Many thermostats can be programmed to shut off automatically during times when you are away, even if it is only for the day.

Avoid Using Unnecessary Appliances

If you have a barbecue, using it can help to reduce the amount you spend cooling your home and cooking your food. Ovens and stoves require more electricity and end up adding additional heat to your home. You can also eliminate using a drier by hanging your laundry to dry. Take advantage of the warm, dry weather by setting up a clothesline in the backyard or hanging clothes on a drying rack.

Spend More Time Outside

One of the easiest ways to reduce your summer electricity bill is by taking advantage of the sunshine and planning more outdoor activities. Turn off your televisions, stereos, and computers and spend time outdoors with friends and family.

Manage the Moisture in Your Home

Sometimes the heat in your home is not the problem, the humidity is. If you find that the humidity levels in your home are too high, take these simple steps to help manage the moisture in your home:

  • Move indoor plants outside, as plants produce a lot of airborne moisture.
  • Run bathroom fans for a full 20 minutes after a shower or bath to help dry out the air.
  • Consider investing in a dehumidifier.

Switch from Incandescent Lights to LEDs

Making a simple switch from incandescent lights to compact fluorescent lights can make a big difference in how warm a space feels. Incandescent light bulbs waste almost 90% of their energy as emitted heat. Not only will switching out your light bulbs cool your home but it will also help reduce your electricity bill.

Shield Your Home from the Sun

Closing the curtains and blinds on sunny days or planting trees to shade your home can help cut down on your air conditioning needs.

If you are interested in learning more ways to reduce your summer electrical bill, or to find out more about the lighting and electrical services we offer, please contact Expert Electric at 604-681-8338.

The post Reducing Your Summer Electrical Bill appeared first on Expert Electric Blog.

Myths Revolving Around LED Lights

Myths Revolving Around LED Lights

Here are some common myths that come up regarding LED lights.

New myths pop up regarding technologies all of the time. Many technologies are fairly new, meaning misunderstandings revolving around them are bound to happen. One such technological advancement that still has a few myths revolving around it is LED lighting. Even after around a decade of working with LED lights, there are misunderstandings about them that need to be cleared up. Here are some common myths that come up regarding LED lights.

“LED Lights Last Forever.”

Since LED lights don’t heat filaments up, they don’t have too much thermal stress, which results in them lasting longer than traditional light bulbs. That said, they still have a life expectancy, and it isn’t one eternity. Even though LED bulbs will last for a long time, they will eventually start to dim and burn out. But, with proper care, your bulbs can last you for several thousand hours before you need to replace them.

“LED Lights are Expensive.”

Back in the day, LED lights were more expensive. However, in recent years, their price has fallen significantly, meaning they are more accessible on a budget, and they are great value for what you pay. While incandescent light bulbs are also cheap, you don’t have the longevity that LEDs offer. Over time, LED lights will save you more money than if you use incandescent bulbs.

“LED Lights Have Dangerous Substances.”

LED lights don’t have a lot of dangerous substances that should worry you. They don’t have any mercury in them that can leak out. However, there are phosphors that LEDs use. These phosphors are bound inside of the semiconductor material. If this is hazardous, it doesn’t have the ability to leak out and cause harm to anyone.

“Blue LEDs Can Be Harmful to the Eyes.”

While there is a misunderstanding on how much danger blue LEDs pose to the eyes, this myth is founded on a fairly factual background. There have been studies done that determined how extended exposure to blue lighting can disrupt the brain’s ability to release melatonin. Too much blue light has been thought to contribute to macular degeneration over time. However, the intensity of the light from LED bulbs isn’t as intense as the light that comes from the sun, phones, or computers.

Check Out Our Services From CMI Lighting

With over 35 years in the industry, CMI has an array of equipment to handle the logistics of any in-house job. We also frequently provide solutions to property managers and upcoming developments. CMI Companies provides services in Mid-Atlantic Region and proudly serves clients in Northern Virginia, Maryland, Richmond, Southern Virginia, Manassas, Prince William County, Fairfax County, Rockville, and Prince George’s County. Also, check us out on Facebook, Twitter, and LinkedIn.

The post Myths Revolving Around LED Lights appeared first on CMI Companies.

Scary Electrical Problems In Your Toms River Home

No one wants to be in for a nasty shock at home. But that’s exactly what can happen if your electric system is not well maintained, or if you try to fix electrical problems yourself.

In unskilled hands, electricity can be very dangerous. We’re here to let you know when you should call out the professionals. That way you’ll keep yourself and your Toms River home safe.

So if you have flickering lights or switches that are hot to touch then read on. Here are the most common electrical problems that need the help of a pro.

Frequently Tripping Breakers

This usually means you have a circuit that’s overloaded. Some high wattage items need a real power punch. This can be a problem if you’re running other items off the same circuit.

If this is a continuing and frequent issue, it’s a potential fire risk and a sign that something’s not right.

Perhaps you’ve just moved into a home with old and outdated wiring. Now may be time to add a circuit or consider upgrading your electric wiring. Either way, it’s time to call the electrician.

Flickering Lights

Fluorescent and LED lighting can be prone to flickering, especially in the first minute of turning them on. Lightbulbs that haven’t been screwed in properly may also flicker. This will stop once they’re tightened.

If the problem is frequent and constant then this could be due to a loose connection. Loose wiring is one of the most serious causes of flickering lights and a major cause of house fires. A professional will sort this out for you.

Light Bulbs Burning out Too Often

Even if you bought a bulb with the right wattage, it could be that it’s too large for your fixture. This may cause overheating and result in the bulb burning out. Excessive vibration close to the bulb may also cause premature burnout.

If you’re getting through lightbulbs at an excessive rate, then it could mean your fixtures or wiring were poorly installed. Get them checked out by a qualified electrician.

Warm Switches

It’s normal for a dimmer switch to be slightly warm. If it doesn’t adjust the light correctly, it may be that the product is below standard or hasn’t been connected properly.

Generally speaking, warm switches are a cause for concern and could mean there’s a circuit or wiring fault. Consult an electrician if you have issues with any switches in your home.

Recurrent Electrical Surges 

Electrical surges could be due to a lightning strike or damaged power lines. They may though be due to poor wiring in the home.

If you’re experiencing frequent surges then this could be harmful to the electrical appliances connected in your home. An electrician will help you get to the root of the problem.

Fix Electrical Problems and Save Money

Everyone wants to have lower utility bills. Repairing damaged wiring and circuits can do just that.

We want you to be safe. So whatever electrical problems you’re experiencing, get in touch with us and we’ll be right there to sort them out for you.

The post Scary Electrical Problems In Your Toms River Home appeared first on Petersen Electric.

Summer Lighting Maintenance Checklist

Summer Lighting Maintenance Checklist

Here are some tasks you should put on your summer lighting maintenance checklist.

Having lighting is essential for practically any building. Lights allow the building to function even after the sun goes down and offer an aesthetic appeal that makes the area more warm and inviting. That said, lighting isn’t without its shortcomings. You’ll have to perform maintenance to keep your lights in good shape. Here are some tasks you should put on your summer lighting maintenance checklist.

Take a Walk Around the Building

Walk along the perimeter of your property while your lights are on and see if any of your lights aren’t working. If you notice only one bulb or one small section of bulbs is not lighting up, it could be the bulbs that have to be replaced. However, there’s also the chance that there is a cut wire. If this is the case, you want to hire a lighting company to have the issue resolved.

Damaged Fixtures

Another item on your lighting checklist should be to check your lighting fixtures to see if any of them have been damaged. There are many causes for damaged lighting fixtures, such as intense weather and falling branches. Your lighting fixtures should be able to take a few hits, but things pop up, and over time, the damage can become too much.

Faulty Connections

You should always check your connections as part of your summer lighting checklist. Sometimes, connections can come loose for a variety of reasons. This can pose a danger to your building, so just keep a close eye on your connections to make sure everything is in order.

Overgrown Landscape

Sometimes, the reason for your lighting fixtures being damaged has nothing to do with the lights themselves. There are instances in which your own landscape is the culprit for damaged lighting fixtures. Since your landscape can grow and change over time, you need to make sure it doesn’t impact your initial lighting design. Just make sure you trim your hedges and readjust your lights to make sure they fit well into your landscape design.

Tipped and Tilted Lighting Fixtures

Lighting fixtures can tip or get tilted at times, and this can affect the lighting effect that you want. Just make sure that your lights are facing the direction you want them to face. If they aren’t, take a moment to readjust them as part of your summer lighting checklist.

Check Out Our Services From CMI Lighting

With over 35 years in the industry, CMI has an array of equipment to handle the logistics of any in-house job. We also frequently provide solutions to property managers and upcoming developments. CMI Companies provides services in Mid-Atlantic Region and proudly serves clients in Northern Virginia, Maryland, Richmond, Southern Virginia, Manassas, Prince William County, Fairfax County, Rockville, and Prince George’s County. Also, check us out on Facebook, Twitter, and LinkedIn.

The post Summer Lighting Maintenance Checklist appeared first on CMI Companies.

Deck Lighting and Outlet Installation Services

Installing deck lighting and outdoor outlets in your yard can extend your outdoor living opportunities well into the evening while also improving your home’s resale value. As the nights get warmer and with more families looking for ways to make close-to-home spaces seem more exotic, this is an excellent option that adds a lot of curb appeal too. There are many beautiful options for deck lighting that can improve safety and security as well. And extra outdoor outlet installation can give you more options for adding string lights, outdoor appliances and even a place to plug in your laptop for some outdoor home office scenery.

4 Deck Lighting Installation Ideas 

Depending on your deck design, outdoor living habits and goals, and how you’d like to improve those things, there are a number of different deck lighting options you can consider. And within these 4 deck lighting ideas, there are also many variations that you can consider: 

1. Step Lighting or Deck Stair Lights

One way to better illuminate your deck stairs is to install lighting right on them – on the vertical surface of each step, or under the lip of each step so that the light from the upper step shines clearly down on the lower step. This keeps the light focused downard to enhance safety going up and down the steps in the dark, and can also enhance your security lighting options as well. It also prevents light escaping upwards at night if you’re hoping for a good view of the stars.

2. Deck Post Lighting

There are many different styles and materials of deck post lighting. You can choose styles, colors and materials (from copper, aluminum or stainless steel and even plastic) that will look great and provide a decorative touch even during the daytime. Deck post lights should face down, again to illuminate the footpath or stairway at night. Deck post lighting is a very affordable option and can usually be installed quite easily. But if you’re a stickler for viewing the night sky, remember that these can produce more light pollution because they’re situated higher up than step lighting. 

3. Recessed Lighting on the Deck

Recessed lighting can be a great solution if you have a large overhang that needs illuminating on your deck. It provides great illumination to everything below and can be focused on certain areas that you particularly want to highlight or provide extra visibility for on your deck or backyard.

4. Deck Rail Lighting

Deck rail lighting is also a great option that can be built flush into your deck rails in such a way as to make them invisible when you’re sitting. Again, they focus the light downwards toward the walkway or the stairs and also show people where the rail is.

4 Reasons to Install Outdoor Outlets

In addition to installing extra deck lighting, if you really want to get more use out of your deck area, installing outdoor outlets that are protected from the elements is another smart move: 

1. More Deck Lighting Options

In addition to the deck lighting ideas listed previously, having a few extra outdoor outlets installed gives you more options for adding string lights or other electric-powered holiday decorations for the holidays. Just make sure you also have enough extra circuits to provide the power necessary to keep those lights brightly shining. 

2. Outdoor Cooking Appliances

As outdoor living and cooking become more popular, home chefs will need safe outlets and spaces that are protected from the weather to cook and use kitchen appliances outdoors. Whether that means you want to have an outdoor fridge or powered cooler, an electric grill or any other appliance, you’ll need to install outdoor outlets. 

3. Extending Your Home Office to the Outdoors

After several weeks of working from home in the kitchen or the living room, or maybe a dedicated indoor home office, you may be feeling the pull of the outdoors. If you’re tempted to tote your laptop outside to the deck, make sure you have a place to plug it in safely while you’re out there so you don’t lose power right in the middle of your next Zoom meeting. 

4. Safety Upgrades for Outdoor Outlets 

All outdoor outlets should be GFCI outlets that automatically shut power if they become wet. But newer models exist that provide extra protection from the weather and elements. Safety is always the most important consideration, so if you are not sure about your current outlets or want to install new outdoor outlets, contact us today for a virtual estimate and we can provide guidance. 

Install Deck Lighting and Outdoor Outlets

Remember that installing new deck lighting or outdoor outlets is a job best left to a licensed electrician for safety reasons, but also quality and insurance reasons. Get the job done right, and beautifully, the first time by contacting us today at Root Electric: (703) 494-3989.

This post appeared first on https://rootelectric.com

Lighting Installation Ideas for 2020

Getting the right lighting in your home can make a big difference in its overall look and feel. Different types of light fixtures can provide different kinds of light to a room and the way that the light fixture looks can change its style. For this reason, it is important to ensure that you pick out the best lighting setup possible for your home and keep things up to date as your home changes over the years. At Expert Electric, we have loads of great lighting installation ideas for 2020 and we are always happy to help our clients figure out what solution works best for their unique home.

Lighting Styles and Installation Ideas for 2020 Homes

Even if you are not renovating your entire home, changing up its lighting setup can help you to freshen up the space. Some modern ideas for lighting your home in 2020 include:

Industrial Styles

The industrial style has been popular for a while now, and it is only increasing in popularity. Dark metal elements with exposed bulbs make for great light fixtures, especially when used in chandeliers and pendant lights. Edison bulbs can give off a nice, warm glow while complementing the industrial fixtures, and there are many options available for LED Edison bulbs to save on energy.

Hidden Lights

Using unseen light sources is becoming a popular way of providing soft lighting to a room. Examples of this could include a series of lights hidden behind the rim of a shelf and pointing at the wall or ceiling, or a string of LED’s tucked along the edge of a vaulted ceiling, similar to a movie theatre. Lighting under cabinets has been around for a long time, and they continue to be popular as a source of hidden lighting.

Smart Lighting Technology

Smart home technology is making some differences in how light fixtures are put in. Many smart light fixtures offer various light settings, including different levels of light for different times of day, various colour settings, and the ability to control the entire home’s lighting from smartphones.

If you are interested in learning more lighting installation ideas for 2020, or to find out more about the lighting and electrical services we offer, please contact Expert Electric at 604-681-8338.

The post Lighting Installation Ideas for 2020 appeared first on Expert Electric Blog.

Common Electrical Problems That Business Owners Encounter

Common Electrical Problems That Business Owners Encounter

Here are some of the most commonplace electrical problems that business owners will likely face.

Every business wants to keep their employees and customers safe. Safety should always be the top priority of any business. Part of keeping everything running smoothly is to have a functional electrical system. However, there are many problems that can affect your system, and these problems can compromise the safety of everyone in the building. Here are some of the most commonplace electrical problems that business owners will likely face.

Power Surges

Some people think that power surges always mean that a business will be without power for an extended period of time. While this is not the case, power surges can still be an issue. Electrical surges can harm your business’s appliances, or even harm the electrical system itself.

Power surges can come up for many reasons. Sometimes, strong storms can be the culprit, with lightning that strikes down power lines or winds that blow trees onto those power lines. Power surges can also occur when using faulty electrical appliances or any electrical appliance that demands a considerable amount of power.

Outdated or Faultily-Installed Wiring

With properly installed electrical wiring, you’ll be able to use appliances that demand electricity without problems. However, when wiring is either not installed properly or is otherwise outdated, problems can pop up. Faulty wiring can cause flickering to occur, and sometimes, outlets can begin to spark. To remedy this problem, it’s best to get new wiring. Looking into a professional electrical company is often the best solution. Installing wiring is a dangerous job, and you could get hurt trying to do the job yourself. Professionals have the necessary training, knowledge, and experience to get the job done as safely and efficiently as possible.

Circuit Breaker Overloading or Tripping Frequently

The circuit breaker around your business is necessary for protecting your building if your building starts using too much electricity at once. That said, it can easily try one’s patience when a circuit breaker overloads or trips all of the time. Similarly to power surges, circuits can trip or become overloaded whenever an electrical device requires too much power or if there are too many devices demanding power at one time. It helps to use energy-efficient devices so you can minimize the chance of this problem occurring.

Check Out Our Services From CMI Lighting

With over 35 years in the industry, CMI has an array of equipment to handle the logistics of any in-house job. We also frequently provide solutions to property managers and upcoming developments. CMI Companies provides services in Mid-Atlantic Region and proudly serves clients in Northern Virginia, Maryland, Richmond, Southern Virginia, Manassas, Prince William County, Fairfax County, Rockville, and Prince George’s County. Also, check us out on Facebook, Twitter, and LinkedIn.

The post Common Electrical Problems That Business Owners Encounter appeared first on CMI Companies.

When to Replace Your Bulbs With LED Lights

When to Replace Your Bulbs With LED Lights

When you find yourself facing these scenarios, it’s probably time to replace your traditional bulbs with LED lights.

Lighting is essential, and at the end of the day, how we light up the world matters. Whether the piece of the world you’re lighting up is your private residence or the public parking lot outside of your business, the lights that you choose will have huge impacts: on the environment, on your productivity, on safety, and (yes) on your budget. The difference between traditional and LED bulbs can be huge, but how do you know when it’s the right time to switch to them? When you find yourself facing these scenarios, it’s probably time to replace your traditional bulbs with LED lights.

Difficult To Replace

If you’ve got lights burning out that are difficult to replace, now is a good time to consider LEDs. These could be the lights way up in the fixtures above your parking lot or the fixture that illuminates your two-story foyer. If it’s hard to get to, you want to limit the number of times you have to haul out the ladder (or worse, pay to rent a cherry picker). LED lights last three times longer than conventional bulbs on average. For most LED lights, this means they last about 50,000 hours or 11 years. Wouldn’t it be nice not needing to think about those lights for 11 years?

High Utility Costs

If your utility costs are eating your budget, switching to LED lighting could help you in the long run. It’s important to note that LED lights are more expensive than traditional lights upfront. However, they offer significant savings on energy over the life of the bulb and remember that that lifespan is typically three times as long. So while you would have to shell out for traditional bulbs up to three times, you’re only buying LEDs once. On top of that, those LEDs are using about 90% less energy. That’s a lot of savings.

Environmental Concerns

Whether your concern for the environment and your personal (or business) carbon footprint is a personal thing or a matter of your brand, changing to LEDs can help you go green. From a business perspective, many people choose to use businesses that align with their personal philosophies, so if good environmental stewardship is part of your brand, switching to energy-efficient lighting should be on your to-do list.

Safety Concerns

If there is an area of your property that is prone to crime or needs more security, LED lighting could be the ideal solution. Crime rates increase in dark areas, so adding lights to your property will help improve safety and security.

CHECK OUT OUR SERVICES FROM CMI LIGHTING

With over 35 years in the industry, CMI has an array of equipment to handle the logistics of any in-house job. We also frequently provide solutions to property managers and upcoming developments. CMI Companies provides services in Mid-Atlantic Region and proudly serves clients in Northern Virginia, Maryland, Richmond, Southern Virginia, Manassas, Prince William County, Fairfax County, Rockville, and Prince George’s County. Also, check us out on Facebook, Twitter, and LinkedIn.

The post When to Replace Your Bulbs With LED Lights appeared first on CMI Companies.

This website nor its owners are an actual service provider, this website is a referral service. When you place a phone call from this website, it will route you to a licensed, professional service provider that serves your area. For more information refer to our terms of service.

© ElectriciansNearMe.pro

Call Now Button(877) 959-3534